Air filter Arida Clean 600 (HEPA 11/13)

Original filter package for replacement for Arida Clean 600 air purifier

Air filter Arida Clean 600. The air purifier comes with HEPA 11 as a standard air filter, but if better air purification is desired, HEPA 13 can replace this filter.

The filter package consists of 1 HEPA filter and 1 activated carbon filter, so if you wish to replace all filters in your machine, you will need 2 filter packages.

HEPA filters remove small particles from the air. These are the particles that are dangerous to inhale and cause discomfort for allergy sufferers. Typical particles captured by these filters include pollen, fine dust, traffic pollution (diesel particles, tire dust, road dust), pet dander, and small fibers from clothes, furniture, and textiles.
Behind each HEPA filter is an activated carbon filter. These remove harmful gases from the air. Volatile Organic Compounds (VOCs) are gases, odors, and chemicals that can be harmful to you and your family. These dangerous organic compounds can come from paint, renovations, building materials, cooking, traffic, cosmetics, cleaning products, furniture, carpets, curtains, and mattresses. Formaldehyde is the most well-known of the volatile organic compounds, and this can be released from furniture, textiles, and plastics for several years after they were new.

Air filter	Fan capacity
With HEPA 11 Standard	690 m3/ hour
With HEPA 13 Optional	630 m3/ hour

How often should the filters be replaced?

According to the actual use of the filter, the machine automatically calculates the filter's expiration time.

When the machine's operating time reaches 3600 hours, the reminder indicator will flash. The operating time calculation

is as follows:

1. First fan speed: Accumulating 0.25 seconds per second
2. Second fan speed: Accumulating 0.5 seconds per second
3. Third fan speed: Accumulating 1 second per second
4. Fourth fan speed: Accumulating 2 seconds per second

How to replace filters in the Arida Clean 600 air purifier

It is easy to replace filters in your Arida Clean 600 air purifier.

• Turn off the appliance and disconnect from power
• Remove the side cover. This is held in place by magnets
• Vacuum the pre-filter
• Remove the old filters and dispose of them appropriately
• Remove the packaging and insert new filters in the same order as the old ones
• Replace the cover
• Remember that you also have corresponding filters on the other side
• Connect to power and start the appliance. Check that it works as it should

Shipping

We offer free shipping to your nearest pick-up point on all orders over NOK 999. All orders are shipped within 24 hours of ordering, provided it is a regular working day.

Normally, you will have your goods at the pick-up point 1-3 days after we have received your order. We will send you a tracking number when the package leaves our warehouse, and the carrier will notify you when the package can be picked up. Therefore, it is important that you provide your mobile number and email address.